This site requires JavaScript to be enabled
Welcome Guest|
Recent searches
IE BUMPER

Connecting to ResNet: Other

Number of views : 0
Article Number : KB0014151
Published on : 2021-10-06
Last modified : 2021-10-06 18:26:49
Knowledge Base : IT Public Self Help

The following instructions will allow you to connect your device for wired access on the general networks if it is not a standard Windows or Mac machine (ie. Linux computers, TVs, gaming console).

If your device has a web browser:

  1. Disable Wi-Fi temporarily on your device to ensure you are configuring the wired connection.
  2. Plug your device into an Ethernet port using an Ethernet cable.
  3. Open a web browser on the computer and type “http://register.network.utexas.edu” in the address bar and hit Enter. You will be automatically redirected to the UTLogin page. Note: your browser may display a security warning or a certificate error as the result of web redirect, please ignore the warning and proceed to the redirected site (http://register.network.utexas.edu).
  4. Follow instructions to register your device.
  5. You may need to re-enable Wi-Fi on your device if you plan to disconnect from wired.

If your device does not have a web browser:

  1. Use your cell phone or a device with cellular or Wi-Fi access, go to http://register.network.utexas.edu
  2. Log in using your UT EID and UT EID Password.
  3. Click "Register Wired Device" and follow instructions to register your device.


Thank You! Your feedback has been submitted.

Feedback