Connecting to ResNet: macOS
Number of views :
1
Article Number :
KB0014147
Published on :
2018-08-01
Last modified :
2019-01-12 17:27:13
Knowledge Base :
IT Public Self Help
The following instructions will allow you to securely connect your device on the general networks.
- Disable Wi-Fi temporarily on your device to ensure you are configuring the wired connection.
- Plug your device into an Ethernet port using an Ethernet cable. Note: depending on your computer model, an Ethernet adapter (Thunderbolt or USB) may be required.
- Wait approximately 5 seconds for 802.1X network prompt (shown below). Enter your EID for account name, and your EID password for password, check "Remember this information", click "OK".
- You may need to re-enable Wi-Fi on your device if you plan to disconnect from wired.
Thank You! Your feedback has been submitted.